Crude Oil Price by oil-price.net

Oil and Gas Energy News Update

Showing posts with label Operators. Show all posts
Showing posts with label Operators. Show all posts

Wednesday, September 7, 2011

All Evacuated Personnel nearly Returned - BOEMRE

- All Evacuated Personnel nearly Returned - BOEMRE

Wednesday, September 07, 2011
BOEMRE

Offshore oil and gas operators in the Gulf of Mexico are re-boarding platforms and rigs, and restoring production following Tropical Storm Lee. The Bureau of Ocean Energy Management, Regulation, and Enforcement (BOEMRE) Hurricane Response Team is monitoring the operators' activities. The team will continue to work with offshore operators and other state and federal agencies until operations return to normal.

Based on data from offshore operator reports submitted as of 11:30 a.m. CDT Wednesday, personnel remain evacuated from a total of 21 production platforms, equivalent to 3.4 percent of the 617 manned platforms in the Gulf of Mexico. Production platforms are the structures located offshore from which oil and natural gas are produced. Unlike drilling rigs, which typically move from location to location, production facilities remain in the same location throughout a project's duration

Personnel have been evacuated from 4 rigs, equivalent to 5.7 percent of the 70 rigs currently operating in the Gulf. Rigs can include several types of self-contained offshore drilling facilities including jackup rigs, submersibles and semisubmersibles.

As part of the evacuation process, personnel activate the applicable shut-in procedure, which can frequently be accomplished from a remote location. This involves closing the sub-surface safety valves located below the surface of the ocean floor to prevent the release of oil or gas. During the recent hurricane seasons, the shut-in valves functioned 100 percent of the time, efficiently shutting in production from wells on the Outer Continental Shelf and protecting the marine and coastal environments. Shutting-in oil and gas production is a standard procedure conducted by industry for safety and environmental reasons.

From operator reports, it is estimated that approximately 36.9 percent of the current oil production in the Gulf of Mexico has been shut-in. It is also estimated that approximately 18.1 percent of the natural gas production in the Gulf of Mexico has been shut-in. The production percentages are calculated using information submitted by offshore operators in daily reports. Shut-in production information included in these reports is based on the amount of oil and gas the operator expected to produce that day. The shut-in production figures therefore are estimates, which BOEMRE compares to historical production reports to ensure the estimates follow a logical pattern.

After the storm has passed, facilities will be inspected. Once all standard checks have been completed, production from undamaged facilities will be brought back on line immediately. Facilities sustaining damage may take longer to bring back on line. BOEMRE will continue to update the evacuation and shut-in statistics at 1:00 p.m. CDT each day as appropriate.

Oil & Gas Post

Promote Your Page Too
LINK

Monday, September 5, 2011

BOEMRE: Operators Evacuate Ops in GOM

- BOEMRE - Operators Evacuate Ops in GOM

Monday, September 05, 2011
BOEMRE

Offshore oil and gas operators in the Gulf of Mexico are evacuating platforms and rigs in the path of Tropical Storm Lee. The Bureau of Ocean Energy Management, Regulation, and Enforcement (BOEMRE) Hurricane Response Team is monitoring the operators' activities. The team will continue to work with offshore operators and other state and federal agencies until operations return to normal and the storm is no longer a threat to Gulf of Mexico oil and gas activities.

Based on data from offshore operator reports submitted as of 11:30 a.m. CDT Sunday, personnel have been evacuated from a total of 239 production platforms, equivalent to 38.7 percent of the 617 manned platforms in the Gulf of Mexico. Production platforms are the structures located offshore from which oil and natural gas are produced. Unlike drilling rigs, which typically move from location to location, production facilities remain in the same location throughout a project's duration

Personnel have been evacuated from 25 rigs, equivalent to 35.7 percent of the 70 rigs currently operating in the Gulf. Rigs can include several types of self-contained offshore drilling facilities including jackup rigs, submersibles and semisubmersibles.

As part of the evacuation process, personnel activate the applicable shut-in procedure, which can frequently be accomplished from a remote location. This involves closing the sub-surface safety valves located below the surface of the ocean floor to prevent the release of oil or gas. During the recent hurricane seasons, the shut-in valves functioned 100 percent of the time, efficiently shutting in production from wells on the Outer Continental Shelf and protecting the marine and coastal environments. Shutting-in oil and gas production is a standard procedure conducted by industry for safety and environmental reasons.

From operator reports, it is estimated that approximately 60.2 percent of the current oil production in the Gulf of Mexico has been shut-in. It is also estimated that approximately 44.3 percent of the natural gas production in the Gulf of Mexico has been shut-in. The production percentages are calculated using information submitted by offshore operators in daily reports. Shut-in production information included in these reports is based on the amount of oil and gas the operator expected to produce that day. The shut-in production figures therefore are estimates, which BOEMRE compares to historical production reports to ensure the estimates follow a logical pattern.

After the hurricane has passed, facilities will be inspected. Once all standard checks have been completed, production from undamaged facilities will be brought back on line immediately. Facilities sustaining damage may take longer to bring back on line. BOEMRE will continue to update the evacuation and shut-in statistics at 1:00 p.m. CDT each day as appropriate.

Oil & Gas Post

Promote Your Page Too
LINK

Wednesday, June 29, 2011

Keppel Secures Shipbuilding Contracts from Brazilian Operators

- Keppel Secures Shipbuilding Contracts from Brazilian Operators

Wednesday, June 29, 2011
Keppel Corp. Ltd.

Keppel Singmarine Brasil (KSM Brasil), Keppel Offshore & Marine Ltd (Keppel O&M)'s new 7.6-ha shipbuilding facility in the state of Santa Catarina, has secured two newbuild contracts worth about S$140 million from fleet operators in Brazil.

The first contract entails building a series of six 45-tonne bollard pull twin-screw Azimuth Stern Drive (ASD) harbour tugboats, for REBRAS - Rebocadores do Brasil S.A. (SMIT Rebras).

In the second contract, the yard will construct a large-sized 4500dwt Platform Supply Vessel (PSV) based on its proprietary MTD 9045P-DE design for Keppel O&M's Brazilian ship-owning arm, Guanabara Navegacao.This is the first vessel constructed under the business model to build Offshore Support Vessels in anticipation of demand in Brazil, and such vessels will be offered for bare-boat charter or sale upon completion.

KSM Brasil specialises in constructing Offshore Support Vessels such as Anchor Handling Tug Supply (AHTS) vessels, PSVs, Oil Recovery Support Vessels and harbour/terminal tugboats.

The new facility in Brazil is also able to fabricate offshore steel structures and support major projects undertaken by Keppel's BrasFELS yard in Angra dos Reis.

Mr. Hoe Eng Hock, Executive Director of KSM Brasil shared, "Petrobras will need over 100 Brazilian-built offshore support vessels by 2020, to facilitate the exploration and development of the Santos Basin's deep water pre-salt fields. We see a growing market for purpose-built support vessels that can operate safely and efficiently offshore Brazil.

"Keppel Singmarine has been building harbour tugs for the global fleet of Smit in Singapore and China Nantong for the past 20 years. With the award of six harbour tugs contract, the relationship and partnership between Smit and Keppel has deepened and expanded to the new frontier in Brazil."

KSM Brasil's scope for the six tugboats includes detailed design and engineering work and the purchase of all equipment. The first tugboat will be delivered in 4Q2012, followed by the remaining five at three-month intervals. These Robert Allan-designed tugboats will be deployed by SMIT Rebras to work at key ports across Brazil.

Meanwhile, GNL's 4500 dwt PSV is slated for completion in 2013. The PSV is custom-designed by Keppel's Marine Technology Development unit to meet the stringent requirements of Petrobras. The unique arrangement of the PSV's internal tanks and systems enable it to transport a wide combination of oil-based and water-based bulk cargoes for offshore exploration and production.

This ABS Classed PSV spans 94.2m long and 19.8m wide. It features a large deadweight capacity in excess of 4,500 tonne and a deck space of 1000sqm which can accommodate 26 crew members. Equipped with a diesel-electric propulsion system and dynamic positioning (DP) 2 capability, this PSV is well suited to operate in different offshore conditions.

The above contracts are not expected to have any material impact on the net tangible assets and earnings per share of Keppel Corporation Limited for the current financial year.

Oil & Gas Post

Promote Your Page Too

Thursday, May 5, 2011

ABS Unveils New Standards for MODU Operators

ABS Unveils New Standards for MODU Operators

American Bureau of Shipping

The increased technical sophistication of drill ships and other mobile drilling units, coupled with the greater regulatory oversight of offshore drilling, has spurred ABS to develop a new suite of classification standards and notations intended to provide MODU operators with increased confidence that their operations are being conducted to the highest demonstrable standards.

"ABS is the leading provider of classification services to the offshore sector," said ABS President and CEO Christopher J. Wiernicki. "We have been talking with the industry, regulators and others with related interests. This has helped us to clearly define existing standards that can be improved, and to also identify those new areas that would benefit from having an independent, third party set of standards that properly address the new technologies that are being incorporated into the latest designs of drillships, semis and jackups."

That research has indicated a broad range of both design and operational aspects that warrant additional guidance, according to Ken Richardson, ABS Vice President, Energy Development. "Obviously enhanced standards for the classification of drilling systems are key components," he noted, "but operators are also looking for a more holistic approach to the maintenance of their assets and we have developed new notations that can be used by an operator to demonstrate the effectiveness of their maintenance programs."

Richardson also emphasized the need, expressed by many of the ABS MODU operators for an effective independent standard that addresses the integration of the ubiquitous, and increasingly complex, software programs that are essential for the operation of the unit as a whole. "The offshore sector has always been a leader in developing and adopting new technologies and novel concepts," Richardson added. "There is a lot of innovative thinking that goes into the development of the individual components that are brought together in the modern drillship. The key to the safe and seamless operation of the unit is the ability of all these components to function together in a manner that can be controlled by the operational team on board. That is the basis of a lot of our research and the development of our new software notations."

New notations that have been developed by ABS for the drilling sector include Integrated Software Quality Management (ISQM), Systems Verification (SV), DRILLSHIP, Asset Integrity Management (AIM) and Rapid Response Damage Assessment (RRDA). Existing notations that have been enhanced include Classification of Drilling Systems (CDS), Hull Inspection and Maintenance Program (HIMP), Reliability Centered Maintenance (RCM), and Environmental Protection (ENVIRO-OS).

ISQM is a risk-based software development and maintenance process built on internationally recognized standards. The ISQM process validates the software installation on the unit and then monitors for consistency when there are software updates or a change in hardware. ISQM provides a process to manage software over the offshore unit's life.

"There is growing recognition within industry that organizations will need to institute a change management process for software," says Bret Montaruli, ABS Vice President, Offshore Technology. "Industry has traditionally focused on structures and equipment. However, software has become such an important component in the operational phase particularly since control systems for offshore installations and units become more complex. Successful implementation relies heavily on the integration of software developed by multiple vendors." The ABS ISQM Guide places emphasis on the verification and validation of the multiple software packages. The benefit to owners and operators is an increased level of confidence in software reliability with the goal of decreasing downtime and reducing the risk of software related incidents."

The SV notation allows operators to benefit from verifying that the software has been developed in a recognized process that meets the operator's needs and performs as expected. Upgrades and new releases that are routinely made by vendors and which may introduce errors into the system and increase downtime or cause other operating problems are also subject to verification prior to installation.

Award of the DRILLSHIP notation indicates that the vessel has been designed and constructed to the standards contained in the Guide for Drillships. As the principal class society for drillships, ABS is taking the lessons learned and is clarifying the criteria for these specialized vessels.

Asset Integrity Management is a concept that is well established within the offshore sector and has received renewed attention. "Operators are looking for third party confirmation that the day to day maintenance and management of their units conforms to a clear, industry accepted standard and the new ABS AIM notation provides them with such verification," says Richardson. "It builds on the existing Hull Inspection and maintenance Program (HIMP) requirements that several operators have adopted, taking a more holistic approach to the overall management of the MODU." A key element of this is the addition of a state-of-the-art loads and configuration approach that provides the operator with a tool to better understand the operational loads to which the unit is subject.

While HIMP is directed at the inspection and maintenance of the unit's structure, the companion Reliability Centered Maintenance (RCM) notation addresses the manner in which the machinery and equipment on board the unit is maintained, including replacement and repair strategies that are pre-emptive in their approach.

The ABS RRDA program and notation is a well established offering within the shipping industry and has now been enhanced and made available to offshore operators. "The technical assessment of an offshore structure can be much more complex than for a ship such as a tanker," explains ABS Chief Technology Officer Todd Grove. "Many offshore units are unique in their architecture so that the necessary modeling of the unit is similarly complex and the programs must be specifically tailored to the unit. Incidents affecting offshore units over the recent past have highlighted the importance of having the ability to quickly evaluate the unit in the damaged condition so that pro-active response strategies can be implemented that may be able to stabilize the situation preventing or minimizing the possibility of loss of life or ensuing pollution."

ABS has offered the voluntary CDS notation for many years. ABS has revisited the standards with industry and other interested parties to identify those areas that should be strengthened or clarified. The newly issued Guide for the Classification of Drilling Systems includes these enhanced standards and takes a more holistic approach to the entire drilling system from the drill floor to the wellhead including the blow out preventer.

The ENVIRO-OS or ENVIRO-OS+ denotes adherence to enhanced standards for environmental protection. The notation takes into account procedures and requirements for ballast water and sewage management, anti-fouling applications, airborne pollutant discharges, fuel oil and the use of exhaust gas cleaning systems, refrigerants and the Green Passport for ship recycling.

Founded in 1862, ABS is a leading international classification society devoted to promoting the security of life, property and the marine environment through the development and verification of standards for the design, construction and operational maintenance of marine-related facilities.

Oil & Gas Post

Promote Your Page Too