Friday, March 25, 2011
Sterling Energy plc
Sterling provideed the following update for the Sterling operated Sangaw North block in Kurdistan (53.33% working interest).
Sangaw North #1 Well
The side-tracked wellbore of Sangaw North #1 well has been drilled to a depth of 3,360 metres, into the top of the Jurassic formations and at a depth above where the influx of gas was recorded in the previous wellbore.
A liner has been run and cemented across the open hole interval with the liner shoe at approximately 3,340 meters.
The Company now plans to drill ahead and evaluate the Jurassic formations to a well depth of 3,660 meters and estimates this will take approximately one month. During this section, the well is expected to encounter the formations from which gas containing hydrocarbons and hydrogen sulphide entered the well in the previous wellbore. Operations are being conducted using drill pipe resistant to the effects of hydrogen sulphide.
The joint venture partners in the Sangaw North Production Sharing Contract ("PSC") may elect, in the event of encouraging results, to drill further to evaluate deeper Jurassic and Triassic formations.
Petrophysical logs have been acquired across open-hole Cretaceous intervals below 2,400 meters, the base of the intervals logged and flow tested in the previous wellbore. Preliminary evaluation of the logs acquired in the current wellbore, together with hydrocarbon shows and other information acquired while drilling, indicate the presence of hydrocarbons within these deeper Cretaceous intervals. A detailed analysis of all the data acquired is being undertaken to identify whether flow testing of certain intervals may be warranted. Flow testing of Cretaceous intervals, if undertaken, will follow any flow testing that may be undertaken in the Jurassic and Triassic intervals after they have been drilled.
Extension of Exploration Period
Sterling has received confirmation from the Ministry of Natural Resources of the Kurdistan Regional Government that the first sub-period of the exploration phase of the PSC has been extended by one year to allow for the completion of drilling operations in the Sangaw North #1 well and the evaluation of the results of this well. The first sub-period, including the one year extension, will now continue until November 2011.
Angus MacAskill, Sterling's Chief Executive said, "Operations since the gas influx and parted drill pipe in the previous wellbore have been challenging, and we are very pleased to have successfully re-drilled and cased the well to this important point in the upper Jurassic section. From here, we look forward to exploring the potential of the deeper horizons."
Sangaw North #1 Well
The side-tracked wellbore of Sangaw North #1 well has been drilled to a depth of 3,360 metres, into the top of the Jurassic formations and at a depth above where the influx of gas was recorded in the previous wellbore.
A liner has been run and cemented across the open hole interval with the liner shoe at approximately 3,340 meters.
The Company now plans to drill ahead and evaluate the Jurassic formations to a well depth of 3,660 meters and estimates this will take approximately one month. During this section, the well is expected to encounter the formations from which gas containing hydrocarbons and hydrogen sulphide entered the well in the previous wellbore. Operations are being conducted using drill pipe resistant to the effects of hydrogen sulphide.
The joint venture partners in the Sangaw North Production Sharing Contract ("PSC") may elect, in the event of encouraging results, to drill further to evaluate deeper Jurassic and Triassic formations.
Petrophysical logs have been acquired across open-hole Cretaceous intervals below 2,400 meters, the base of the intervals logged and flow tested in the previous wellbore. Preliminary evaluation of the logs acquired in the current wellbore, together with hydrocarbon shows and other information acquired while drilling, indicate the presence of hydrocarbons within these deeper Cretaceous intervals. A detailed analysis of all the data acquired is being undertaken to identify whether flow testing of certain intervals may be warranted. Flow testing of Cretaceous intervals, if undertaken, will follow any flow testing that may be undertaken in the Jurassic and Triassic intervals after they have been drilled.
Extension of Exploration Period
Sterling has received confirmation from the Ministry of Natural Resources of the Kurdistan Regional Government that the first sub-period of the exploration phase of the PSC has been extended by one year to allow for the completion of drilling operations in the Sangaw North #1 well and the evaluation of the results of this well. The first sub-period, including the one year extension, will now continue until November 2011.
Angus MacAskill, Sterling's Chief Executive said, "Operations since the gas influx and parted drill pipe in the previous wellbore have been challenging, and we are very pleased to have successfully re-drilled and cased the well to this important point in the upper Jurassic section. From here, we look forward to exploring the potential of the deeper horizons."
No comments:
Post a Comment