Crude Oil Price by oil-price.net

Oil and Gas Energy News Update

Showing posts with label Primes. Show all posts
Showing posts with label Primes. Show all posts

Friday, August 19, 2011

Statoil Primes Bit for North Sea Drilling

- Statoil Primes Bit for North Sea Drilling

Friday, August 19, 2011
Norwegian Petroleum Directorate

The Norwegian Petroleum Directorate (NPD) has granted Statoil Petroleum AS a drilling permit for well 15/8-2, cf. Section 8 of the Resource Management Regulations.

Well 15/8-2 will be drilled from the COSLPioneer drilling facility, at position 58°24'55.1"N 01°32'49.90"E. COSLPioneer is a new drilling facility that was built in China. The facility was docked at Sandnes this summer to be prepared for its first assignment on the Norwegian shelf.

The drilling program for well 15/8-2 concerns the drilling of a wildcat well in production license 303. Statoil Petroleum AS is the operator with a 100 percent ownership interest.

The area in this license consists of a part of block 15/2 and parts of blocks 15/3, 15/5, 15/6 and 15/8. The well will be drilled about ten kilometers west of the Sleipner Vest field in the central part of the North Sea.

Production license 303 was awarded on December 12, 2003 (APA 2003). This is the seventh well to be drilled in the license area.

The permit is contingent upon the operator securing all other permits and consents required by other authorities prior to commencing the drilling activity.

Oil & Gas Post

Promote Your Page Too
LINK

Monday, August 8, 2011

ATP Primes Bit for Shimshon Prospect Offshore Israel

- ATP Primes Bit for Shimshon Prospect Offshore Israel

Monday, August 08, 2011
ATP O&G Corp.

ATP O&G announced an operations update for its properties in the Gulf of Mexico, the North Sea and Offshore Israel. Company-wide production continues to be 24-25 MMBoe/d.

Clipper

ATP commenced well operations with the Diamond Ocean Victory drilling vessel at the Green Canyon (“GC”) Block 300 (“Clipper”) #2 ST#1 during the second quarter of 2011. In July 2011, ATP successfully completed and flow tested the well at 45.6 MMcf per day plus condensate of 4,656 Bbls per day. The well is scheduled to be placed on production in the middle of 2012 after completion of the pipeline and tie-back to existing infrastructure.

After completion of the GC #2 ST #1, the Diamond Ocean Victory will move to the GC #4 well, re-enter and sidetrack the well to the targeted oil zone. All required permit applications have been submitted to the BOEMRE.

ATP operates Clipper and presently owns a 100% working interest.

Gomez Hub

During June 2011, ATP completed and returned to production the Mississippi Canyon (“MC”) Block 711 #5 well bringing to six the number of wells producing at Gomez. The development drilling plan (“DOCD”) for MC 711 #9 and MC 711 #10 were deemed submitted to the BOEMRE on June 8, 2011. Upon approval of the DOCD and the well permits, ATP expects to commence drilling at MC 711 #9 and #10 with first production expected mid-2012. The exploration plan has also been submitted for MC Block 710, a block immediately adjacent to MC 711 which displays similar seismic and technical characteristics to MC Block 711. Original proved reserve estimates of the Gomez Hub accounted for 14.8 MMBoe. Since commencement of production through June 2011 the Gomez Hub has already produced gross volumes of 24.8 MMBoe (66% oil).

ATP operates the deepwater Gomez Hub, has a 100% working interest in MC 711, 710 and 755, a 75% working interest in MC 754 and owns 51% of the ATP Innovator through a partnership with GE.

Telemark Hub

The MC Block 941 A-1 (#3) continues to produce as expected from the commingled C and D sands. Since inception, October 2010 through June 2011, the well has produced gross volumes of 2.8 MMBoe (85% oil and 15% gas). Based on the strong performance of the #3 well to-date, ATP expects to recover from the #3 and #4 wells all of the reserves that were initially projected from the C and D sands. Current water production of approximately 950 barrels per day is from the D sand which is to be expected since the downdip well, originally drilled by Vastar, was wet. Water cut is expected to increase until the D sand in the well, which represents less than 2% of the total proved and probable reserves of the Telemark Hub, is depleted, at which time the D sand sleeve will be closed. The ATP Titan, the floating production facility that services the Telemark Hub, has the capacity to process 25,000 Bbls of oil/day, 50 MMcf of gas/day and 15,000 Bbls of water/day.

Currently the MC Block 941 A-2 (#4) well is being completed; productive intervals in the C and D sands have been perforated and independently frac-packed. All remaining permits to complete this well have been approved, and remaining operations include running tubing, reconfiguring to allow flow testing the well and turning the A-2 to sales. First sales from the MC Block 941 A-2 are expected in the third quarter.

The MC Block 942 #2 well, which is already drilled to approximately 12,000 feet, will be drilled to total depth upon approval of the drilling permit by the BOEMRE and following the completion of the MC Block 941 A-2 well. ATP plans to complete drilling the well in the fourth quarter and expects first production by year-end.

ATP operates the deepwater Telemark Hub with a 100% working interest and owns 100% of the ATP Titan and associated pipelines and infrastructure.

UK North Sea

During the second quarter, the work on the Octabuoy floating production facility continued in the shipyard. Hull construction is on schedule and completion is expected early in 2012. Platform topsides are under construction in China (the utility module) and the US (the processing module). Upon completion of the processing module it will be shipped to China to be joined with the utility module. The hull and topsides will then sail to Norway for final commissioning and on to the Cheviot field in the North Sea where production is expected to begin in 2014.

In addition to Cheviot, ATP is working on its Skipper and Blythe projects in the UK North Sea. At Skipper, an oil project, an appraisal well to test production rates is scheduled for next year. At Blythe, predominately a gas project, discussions are ongoing to determine the most economic offtake route for the gas from this field. Development at Blythe is expected to commence in 2013. Skipper is located in the central UK North Sea in water depths of approximately 300 feet. Blythe is located in the Southern Gas Basin in water depths of approximately 100 feet. ATP operates both Skipper and Blythe and has a 50% working interest ownership in each.

Israel Expansion

During June 2011, through its subsidiary ATP East Med B.V., ATP acquired interests in three deepwater licenses in the Mediterranean Sea offshore Israel. ATP will operate its licenses, Shimshon, Daniel East and Daniel West, with a working interest of 40%. In the Mediterranean Sea, ATP licenses relate to exploratory prospects where drilling has occurred nearby and hydrocarbons have been discovered by others. ATP capital investment in the Mediterranean Sea is expected to be minimal for the remainder of 2011 as ATP prepares its exploratory and development plans for drilling in 2012.

ATP East Med, as operator of the licenses, has assumed the drilling contract with Transocean Drilling Israel Ltd. for the Sedco Express drilling unit at the Shimshon location where it anticipates initial drilling during the second quarter 2012. ATP expects to spend between $24 and $29 million during 2012 related to the initial exploratory well on the Shimshon license for its 40% working interest.

ATP notes that Isramco Negev, its partner in Shimshon, on March 6, 2011 reported that it received an independent reservoir engineering evaluation from Lockwood & Associates estimating gross potential natural gas reserves at Shimshon. According to Isramco Negev, "Lockwood & Associates considers the calculated assessment of the total geological and geophysical exploration probability of success of 20 percent to be reasonable. Lockwood said its high estimate was for 3.4 TCF, the low estimate was 1.5 TCF and its best estimate was 2.3 TCF."

Additional information on the Daniel East and Daniel West licenses will be provided as drilling and exploration plans are approved. ATP East Med is also party to two other licenses in offshore Israel which are awaiting approval by the Israeli Ministry of National Infrastructure. ATP continues to evaluate acquiring other licenses in the Mediterranean Sea.

Oil & Gas Post

Promote Your Page Too
LINK

Friday, July 15, 2011

Salmander Primes Bit for Cat Ba Prospect

- Salmander Primes Bit for Cat Ba Prospect

Friday, July 15, 2011
Salamander Energy plc


Salamander announced the completion of drilling operations on the Dao Ruang structure, Block L15/50, onshore Northeast Thailand.

The Dao Ruang-3 appraisal well ("DR-3") has been drilled to a total depth of 1,800 meters true vertical depth sub-sea in order to test the pre-Tertiary carbonate section on the northern flank of the Dao Ruang structure. The well intersected a number of zones of interest with associated gas shows and a full suite of wire-line logs have been acquired. Analysis of all available well data suggests that DR-3 would have limited potential as a producer from the current wellbore. Due to this, and wellbore stability reasons, a decision has been made not to flow test the well. The DR-3 well is currently in the process of being plugged and abandoned.

Meanwhile, in Vietnam, the Aquamarine Driller jack up rig that will be used to drill the Cat Ba-1X prospect in Block 101/100-04, Offshore Northern Vietnam, is due to imminently commence mobilization to the well site. The Cat Ba-1X well is expected to spud before the end of July 2011.

James Menzies, Chief Executive Officer of Salamander Energy, said, "Dao Ruang is clearly a very large, gas-bearing structure, though we have not been able to find effective reservoir. We will now use this recent well data, together with the new 3D seismic data acquired over the Sinphuhorm field, to further develop our understanding of the play and review our wider position in the Khorat basin.

Focus of the drilling program now moves to offshore Vietnam with Cat Ba, a 100 MMbbl oil prospect, expected to spud later this month."

Oil & Gas Post

Promote Your Page Too
LINK

Friday, June 10, 2011

Lundin Primes Bit for North Sea Drilling

- Lundin Primes Bit for North Sea Drilling

Friday, June 10, 2011
Norwegian Petroleum Directorate

he Norwegian Petroleum Directorate has granted Lundin Norway AS a drilling permit for well 16/2-7, cf. Section 8 of the Resource Management Regulations.

Well 16/2-7 will be drilled from the Bredford Dolphin drilling facility at position 58°46'48"N 02°39'16"E after completing drilling of wildcat well 16/3-4 for Lundin in production license 501.

The drilling program for well 16/2-7 relates to drilling of a wildcat well in production license 501. Lundin is the operator with an ownership interest of 40 percent. The other licensees are Statoil Petroleum AS with 40 percent and Maersk Oil Norway AS with 20 percent.

The area in this license consists of parts of blocks 16/2, 3, 5 and 6. The well was drilled approximately five kilometers south of the oil discovery well 16/2-6 (Avaldsnes) in the central North Sea.

Production license 501 was awarded on 23 January 2009 (APA 2008). This is the third well to be drilled in the area of the license.

The permit is contingent upon the operator having secured all other permits and consents required by other authorities before starting the drilling activity.

Oil & Gas Post

Promote Your Page Too